Description

Hydrophilic Yarn Lubricant: WAX-4102

Brief introduction

Yarn lubricant WAX-4102 is a paraffin-free wet waxing agent, which is unsurpassed for obtaining lowest friction values. It is used for yarns preferably from cellulose, cellulose/synthetics to obtain good gliding and hydrophilic properties.

Key Features

Confer yarns good hydrophilic properties.

Imparts high surface smoothness.

Low friction values can be obtained.

Non-volatile

Resistant to yellowing under usual drying conditions

Good feel on soft and smooth

Compatible with non-ionic or cationic smoothing agents.

Good stability, non-stick slip, no oil floating

Properties

Physical form              white emulsion

Composition               preparation of polyethylene and waxes

Ionic                     non-ionic, slightly cationic in acid medium

Solubility                  easily dispersible in cold water

Applications

WAX-4101 is prediluted with cold water whilst stirring and added to the liquor.

To achieve a high surface smoothness and good friction values on yarns, primarily on cellulosic fibres and their blends,

0.5 – 1.5 % WAX-4101(related to the weight of yarn)

After a prerun in a slightly acidic finishing liquor at pH 5.5 – 6.0 for ca. 5 min, the temperature is slowly raised to 40 °C, and the material is treated at this temperature for ca.15 – 20 min.

Depending on the control parameters of the machine, the liquor circulation should be 1 : 2 inside-outside / outside-inside.

In case of insufficient bath exhaustion, the addition of ca. 0.5 – 1.0 ml/l acetic acid 60 % is recommended.

Drying can be carried out

Packing and storage

Package: 120KG/Drum.

Keep in a cool place at about 5-40°C for at least 12 months shelf life.

If permanently stored below 0 °C, the product may solidify and/or change its consistency. After heating to 20 – 25 °C and thorough mixing, the product can be used again without any malfunctions